Heavy Duty Record Display Shelf | Removable Wall Mount | Vinyl Shelves
from £4.75
Why buy these ones?
* Sympathetic design - the record's the star.
* Removable, so perfect for rented houses.
* Will comfortably hold the weight of double albums.
* I love my records. This isn't just about making some little plastic things and selling them. (Take a look at my Instagram @robcauson.)
* The print quality is good.
* A whole range of colours.
* I also have Now Playing stands and alphabet dividers available, so why not combine your order?
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your records on a wall to make a display. This version uses two Command Strips (which I include) so is strong enough to hold a single or double with records included. I also have a version that's screw-mounted and is a bit smaller, and another sticky tab-mounted one that's smaller and only takes one sticky tab, so have a look in my shop if this one isn't quite right for you.
The shelves are deep enough to hold a standard double, but probably won't hold a brand new one that doesn't fold flat. They need to have been sat on a shelf with other records for a while so they stay flat. You can use one top and one bottom to hold larger doubles, though I have some brackets in my shop that hold top and bottom so you'd be as well to take a look at them.
-------
FITTING INSTRUCTIONS
To fit your shelf, place the Command Strips vertically (upright, as opposed to sideways) on the back of the shelf, ensuring they're attached to the flat surface and don't overhang. Position them so the tabs that you pull to remove them are visible at the top, so that they'll be hidden behind the record sleeve. Remove the backing strips and press firmly onto your smooth, painted wall, pressing with both hands on the back surface of the shelf only for about 10 seconds. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage to your records. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall. (Clean with isopropyl alcohol if you need to clean first.)
Once fitted, please make sure your record sleeve is centred on the shelf so it doesn't slide off the side. The shelves are small so as to be unobtrusive, which means the record can't be on all wonky.
If you need to remove them, please read the instructions in the FAQs in my shop, but basically you just hold the shelf and pull the removal tab. (If the tab breaks, it's always much better to twist than to pull.)
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
* Sympathetic design - the record's the star.
* Removable, so perfect for rented houses.
* Will comfortably hold the weight of double albums.
* I love my records. This isn't just about making some little plastic things and selling them. (Take a look at my Instagram @robcauson.)
* The print quality is good.
* A whole range of colours.
* I also have Now Playing stands and alphabet dividers available, so why not combine your order?
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your records on a wall to make a display. This version uses two Command Strips (which I include) so is strong enough to hold a single or double with records included. I also have a version that's screw-mounted and is a bit smaller, and another sticky tab-mounted one that's smaller and only takes one sticky tab, so have a look in my shop if this one isn't quite right for you.
The shelves are deep enough to hold a standard double, but probably won't hold a brand new one that doesn't fold flat. They need to have been sat on a shelf with other records for a while so they stay flat. You can use one top and one bottom to hold larger doubles, though I have some brackets in my shop that hold top and bottom so you'd be as well to take a look at them.
-------
FITTING INSTRUCTIONS
To fit your shelf, place the Command Strips vertically (upright, as opposed to sideways) on the back of the shelf, ensuring they're attached to the flat surface and don't overhang. Position them so the tabs that you pull to remove them are visible at the top, so that they'll be hidden behind the record sleeve. Remove the backing strips and press firmly onto your smooth, painted wall, pressing with both hands on the back surface of the shelf only for about 10 seconds. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage to your records. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall. (Clean with isopropyl alcohol if you need to clean first.)
Once fitted, please make sure your record sleeve is centred on the shelf so it doesn't slide off the side. The shelves are small so as to be unobtrusive, which means the record can't be on all wonky.
If you need to remove them, please read the instructions in the FAQs in my shop, but basically you just hold the shelf and pull the removal tab. (If the tab breaks, it's always much better to twist than to pull.)
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
Number of shelves:
Primary color:
Quantity:
Why buy these ones?
* Sympathetic design - the record's the star.
* Removable, so perfect for rented houses.
* Will comfortably hold the weight of double albums.
* I love my records. This isn't just about making some little plastic things and selling them. (Take a look at my Instagram @robcauson.)
* The print quality is good.
* A whole range of colours.
* I also have Now Playing stands and alphabet dividers available, so why not combine your order?
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your records on a wall to make a display. This version uses two Command Strips (which I include) so is strong enough to hold a single or double with records included. I also have a version that's screw-mounted and is a bit smaller, and another sticky tab-mounted one that's smaller and only takes one sticky tab, so have a look in my shop if this one isn't quite right for you.
The shelves are deep enough to hold a standard double, but probably won't hold a brand new one that doesn't fold flat. They need to have been sat on a shelf with other records for a while so they stay flat. You can use one top and one bottom to hold larger doubles, though I have some brackets in my shop that hold top and bottom so you'd be as well to take a look at them.
-------
FITTING INSTRUCTIONS
To fit your shelf, place the Command Strips vertically (upright, as opposed to sideways) on the back of the shelf, ensuring they're attached to the flat surface and don't overhang. Position them so the tabs that you pull to remove them are visible at the top, so that they'll be hidden behind the record sleeve. Remove the backing strips and press firmly onto your smooth, painted wall, pressing with both hands on the back surface of the shelf only for about 10 seconds. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage to your records. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall. (Clean with isopropyl alcohol if you need to clean first.)
Once fitted, please make sure your record sleeve is centred on the shelf so it doesn't slide off the side. The shelves are small so as to be unobtrusive, which means the record can't be on all wonky.
If you need to remove them, please read the instructions in the FAQs in my shop, but basically you just hold the shelf and pull the removal tab. (If the tab breaks, it's always much better to twist than to pull.)
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
* Sympathetic design - the record's the star.
* Removable, so perfect for rented houses.
* Will comfortably hold the weight of double albums.
* I love my records. This isn't just about making some little plastic things and selling them. (Take a look at my Instagram @robcauson.)
* The print quality is good.
* A whole range of colours.
* I also have Now Playing stands and alphabet dividers available, so why not combine your order?
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your records on a wall to make a display. This version uses two Command Strips (which I include) so is strong enough to hold a single or double with records included. I also have a version that's screw-mounted and is a bit smaller, and another sticky tab-mounted one that's smaller and only takes one sticky tab, so have a look in my shop if this one isn't quite right for you.
The shelves are deep enough to hold a standard double, but probably won't hold a brand new one that doesn't fold flat. They need to have been sat on a shelf with other records for a while so they stay flat. You can use one top and one bottom to hold larger doubles, though I have some brackets in my shop that hold top and bottom so you'd be as well to take a look at them.
-------
FITTING INSTRUCTIONS
To fit your shelf, place the Command Strips vertically (upright, as opposed to sideways) on the back of the shelf, ensuring they're attached to the flat surface and don't overhang. Position them so the tabs that you pull to remove them are visible at the top, so that they'll be hidden behind the record sleeve. Remove the backing strips and press firmly onto your smooth, painted wall, pressing with both hands on the back surface of the shelf only for about 10 seconds. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage to your records. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall. (Clean with isopropyl alcohol if you need to clean first.)
Once fitted, please make sure your record sleeve is centred on the shelf so it doesn't slide off the side. The shelves are small so as to be unobtrusive, which means the record can't be on all wonky.
If you need to remove them, please read the instructions in the FAQs in my shop, but basically you just hold the shelf and pull the removal tab. (If the tab breaks, it's always much better to twist than to pull.)
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
Why buy these ones?
* Sympathetic design - the record's the star.
* Removable, so perfect for rented houses.
* Will comfortably hold the weight of double albums.
* I love my records. This isn't just about making some little plastic things and selling them. (Take a look at my Instagram @robcauson.)
* The print quality is good.
* A whole range of colours.
* I also have Now Playing stands and alphabet dividers available, so why not combine your order?
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your records on a wall to make a display. This version uses two Command Strips (which I include) so is strong enough to hold a single or double with records included. I also have a version that's screw-mounted and is a bit smaller, and another sticky tab-mounted one that's smaller and only takes one sticky tab, so have a look in my shop if this one isn't quite right for you.
The shelves are deep enough to hold a standard double, but probably won't hold a brand new one that doesn't fold flat. They need to have been sat on a shelf with other records for a while so they stay flat. You can use one top and one bottom to hold larger doubles, though I have some brackets in my shop that hold top and bottom so you'd be as well to take a look at them.
-------
FITTING INSTRUCTIONS
To fit your shelf, place the Command Strips vertically (upright, as opposed to sideways) on the back of the shelf, ensuring they're attached to the flat surface and don't overhang. Position them so the tabs that you pull to remove them are visible at the top, so that they'll be hidden behind the record sleeve. Remove the backing strips and press firmly onto your smooth, painted wall, pressing with both hands on the back surface of the shelf only for about 10 seconds. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage to your records. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall. (Clean with isopropyl alcohol if you need to clean first.)
Once fitted, please make sure your record sleeve is centred on the shelf so it doesn't slide off the side. The shelves are small so as to be unobtrusive, which means the record can't be on all wonky.
If you need to remove them, please read the instructions in the FAQs in my shop, but basically you just hold the shelf and pull the removal tab. (If the tab breaks, it's always much better to twist than to pull.)
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
* Sympathetic design - the record's the star.
* Removable, so perfect for rented houses.
* Will comfortably hold the weight of double albums.
* I love my records. This isn't just about making some little plastic things and selling them. (Take a look at my Instagram @robcauson.)
* The print quality is good.
* A whole range of colours.
* I also have Now Playing stands and alphabet dividers available, so why not combine your order?
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your records on a wall to make a display. This version uses two Command Strips (which I include) so is strong enough to hold a single or double with records included. I also have a version that's screw-mounted and is a bit smaller, and another sticky tab-mounted one that's smaller and only takes one sticky tab, so have a look in my shop if this one isn't quite right for you.
The shelves are deep enough to hold a standard double, but probably won't hold a brand new one that doesn't fold flat. They need to have been sat on a shelf with other records for a while so they stay flat. You can use one top and one bottom to hold larger doubles, though I have some brackets in my shop that hold top and bottom so you'd be as well to take a look at them.
-------
FITTING INSTRUCTIONS
To fit your shelf, place the Command Strips vertically (upright, as opposed to sideways) on the back of the shelf, ensuring they're attached to the flat surface and don't overhang. Position them so the tabs that you pull to remove them are visible at the top, so that they'll be hidden behind the record sleeve. Remove the backing strips and press firmly onto your smooth, painted wall, pressing with both hands on the back surface of the shelf only for about 10 seconds. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage to your records. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall. (Clean with isopropyl alcohol if you need to clean first.)
Once fitted, please make sure your record sleeve is centred on the shelf so it doesn't slide off the side. The shelves are small so as to be unobtrusive, which means the record can't be on all wonky.
If you need to remove them, please read the instructions in the FAQs in my shop, but basically you just hold the shelf and pull the removal tab. (If the tab breaks, it's always much better to twist than to pull.)
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
