Alphabet Dividers for Vinyl Records, CDs, Books, DVDs (A-Z) Letter Markers
from £17.99
However you organise your records (assuming it's alphabetically) these dividers will keep you right. You'll get a full set of 27. (That's one for each letter of the alphabet plus a #. Amazing!)
You can choose to have them all the same colour or two colours alternating (so A, C, E in one colour, B, D, F etc in the other). If you select for two colours, please tell me in the personalisation bit what you want the colours to be, or add a note to your order. (If you want them a particular way round, e.g. A, C, E definitely in red, B, D, F definitely in blue, please say so, otherwise I'll try to combine prints for the sake of efficiency and do them whichever way round works best.)
The pictures all show letters with the divider tab on the right (letter on the left). This is the default, but if you want the tab on the left just let me know in the personalisation bit.
The letters average 2.5cm cm across and 3cm tall. The tab that goes between the records is about 4cm long and is about 3cm tall. As long as your records aren't too loose they should support the dividers without any issues. Obviously if they are quite loose you're going to have issues, but to an extent that's going to be the case whatever the dividers are like. If you find they're not quite big enough though, I'd suggest just attaching them to some card stock.
These are 3D printed, and so you will have a bit of surface texture. The tabs are 1mm thick, meaning they don't take up a load of space on your shelf, but the letters are 3mm thick so they feel quite chunky and that additional thickness will stop them from disappearing - again, as long as your records aren't too loose.
Any questions just shout, and if you receive them and find they don't work for you, as with any of my products I'm happy to take a return and refund your order in full.
Equally, with these being quite diminutive, if you lose or break one just let me know and I'll replace it.
(If you're looking for the previous version those are still available in my shop. I'll get a link added here shortly.)
You can choose to have them all the same colour or two colours alternating (so A, C, E in one colour, B, D, F etc in the other). If you select for two colours, please tell me in the personalisation bit what you want the colours to be, or add a note to your order. (If you want them a particular way round, e.g. A, C, E definitely in red, B, D, F definitely in blue, please say so, otherwise I'll try to combine prints for the sake of efficiency and do them whichever way round works best.)
The pictures all show letters with the divider tab on the right (letter on the left). This is the default, but if you want the tab on the left just let me know in the personalisation bit.
The letters average 2.5cm cm across and 3cm tall. The tab that goes between the records is about 4cm long and is about 3cm tall. As long as your records aren't too loose they should support the dividers without any issues. Obviously if they are quite loose you're going to have issues, but to an extent that's going to be the case whatever the dividers are like. If you find they're not quite big enough though, I'd suggest just attaching them to some card stock.
These are 3D printed, and so you will have a bit of surface texture. The tabs are 1mm thick, meaning they don't take up a load of space on your shelf, but the letters are 3mm thick so they feel quite chunky and that additional thickness will stop them from disappearing - again, as long as your records aren't too loose.
Any questions just shout, and if you receive them and find they don't work for you, as with any of my products I'm happy to take a return and refund your order in full.
Equally, with these being quite diminutive, if you lose or break one just let me know and I'll replace it.
(If you're looking for the previous version those are still available in my shop. I'll get a link added here shortly.)
Primary color:
Which way round? (Pics show left-handed.):
Quantity:
However you organise your records (assuming it's alphabetically) these dividers will keep you right. You'll get a full set of 27. (That's one for each letter of the alphabet plus a #. Amazing!)
You can choose to have them all the same colour or two colours alternating (so A, C, E in one colour, B, D, F etc in the other). If you select for two colours, please tell me in the personalisation bit what you want the colours to be, or add a note to your order. (If you want them a particular way round, e.g. A, C, E definitely in red, B, D, F definitely in blue, please say so, otherwise I'll try to combine prints for the sake of efficiency and do them whichever way round works best.)
The pictures all show letters with the divider tab on the right (letter on the left). This is the default, but if you want the tab on the left just let me know in the personalisation bit.
The letters average 2.5cm cm across and 3cm tall. The tab that goes between the records is about 4cm long and is about 3cm tall. As long as your records aren't too loose they should support the dividers without any issues. Obviously if they are quite loose you're going to have issues, but to an extent that's going to be the case whatever the dividers are like. If you find they're not quite big enough though, I'd suggest just attaching them to some card stock.
These are 3D printed, and so you will have a bit of surface texture. The tabs are 1mm thick, meaning they don't take up a load of space on your shelf, but the letters are 3mm thick so they feel quite chunky and that additional thickness will stop them from disappearing - again, as long as your records aren't too loose.
Any questions just shout, and if you receive them and find they don't work for you, as with any of my products I'm happy to take a return and refund your order in full.
Equally, with these being quite diminutive, if you lose or break one just let me know and I'll replace it.
(If you're looking for the previous version those are still available in my shop. I'll get a link added here shortly.)
You can choose to have them all the same colour or two colours alternating (so A, C, E in one colour, B, D, F etc in the other). If you select for two colours, please tell me in the personalisation bit what you want the colours to be, or add a note to your order. (If you want them a particular way round, e.g. A, C, E definitely in red, B, D, F definitely in blue, please say so, otherwise I'll try to combine prints for the sake of efficiency and do them whichever way round works best.)
The pictures all show letters with the divider tab on the right (letter on the left). This is the default, but if you want the tab on the left just let me know in the personalisation bit.
The letters average 2.5cm cm across and 3cm tall. The tab that goes between the records is about 4cm long and is about 3cm tall. As long as your records aren't too loose they should support the dividers without any issues. Obviously if they are quite loose you're going to have issues, but to an extent that's going to be the case whatever the dividers are like. If you find they're not quite big enough though, I'd suggest just attaching them to some card stock.
These are 3D printed, and so you will have a bit of surface texture. The tabs are 1mm thick, meaning they don't take up a load of space on your shelf, but the letters are 3mm thick so they feel quite chunky and that additional thickness will stop them from disappearing - again, as long as your records aren't too loose.
Any questions just shout, and if you receive them and find they don't work for you, as with any of my products I'm happy to take a return and refund your order in full.
Equally, with these being quite diminutive, if you lose or break one just let me know and I'll replace it.
(If you're looking for the previous version those are still available in my shop. I'll get a link added here shortly.)
However you organise your records (assuming it's alphabetically) these dividers will keep you right. You'll get a full set of 27. (That's one for each letter of the alphabet plus a #. Amazing!)
You can choose to have them all the same colour or two colours alternating (so A, C, E in one colour, B, D, F etc in the other). If you select for two colours, please tell me in the personalisation bit what you want the colours to be, or add a note to your order. (If you want them a particular way round, e.g. A, C, E definitely in red, B, D, F definitely in blue, please say so, otherwise I'll try to combine prints for the sake of efficiency and do them whichever way round works best.)
The pictures all show letters with the divider tab on the right (letter on the left). This is the default, but if you want the tab on the left just let me know in the personalisation bit.
The letters average 2.5cm cm across and 3cm tall. The tab that goes between the records is about 4cm long and is about 3cm tall. As long as your records aren't too loose they should support the dividers without any issues. Obviously if they are quite loose you're going to have issues, but to an extent that's going to be the case whatever the dividers are like. If you find they're not quite big enough though, I'd suggest just attaching them to some card stock.
These are 3D printed, and so you will have a bit of surface texture. The tabs are 1mm thick, meaning they don't take up a load of space on your shelf, but the letters are 3mm thick so they feel quite chunky and that additional thickness will stop them from disappearing - again, as long as your records aren't too loose.
Any questions just shout, and if you receive them and find they don't work for you, as with any of my products I'm happy to take a return and refund your order in full.
Equally, with these being quite diminutive, if you lose or break one just let me know and I'll replace it.
(If you're looking for the previous version those are still available in my shop. I'll get a link added here shortly.)
You can choose to have them all the same colour or two colours alternating (so A, C, E in one colour, B, D, F etc in the other). If you select for two colours, please tell me in the personalisation bit what you want the colours to be, or add a note to your order. (If you want them a particular way round, e.g. A, C, E definitely in red, B, D, F definitely in blue, please say so, otherwise I'll try to combine prints for the sake of efficiency and do them whichever way round works best.)
The pictures all show letters with the divider tab on the right (letter on the left). This is the default, but if you want the tab on the left just let me know in the personalisation bit.
The letters average 2.5cm cm across and 3cm tall. The tab that goes between the records is about 4cm long and is about 3cm tall. As long as your records aren't too loose they should support the dividers without any issues. Obviously if they are quite loose you're going to have issues, but to an extent that's going to be the case whatever the dividers are like. If you find they're not quite big enough though, I'd suggest just attaching them to some card stock.
These are 3D printed, and so you will have a bit of surface texture. The tabs are 1mm thick, meaning they don't take up a load of space on your shelf, but the letters are 3mm thick so they feel quite chunky and that additional thickness will stop them from disappearing - again, as long as your records aren't too loose.
Any questions just shout, and if you receive them and find they don't work for you, as with any of my products I'm happy to take a return and refund your order in full.
Equally, with these being quite diminutive, if you lose or break one just let me know and I'll replace it.
(If you're looking for the previous version those are still available in my shop. I'll get a link added here shortly.)
