CGC Comic Display Brackets (Wall Mounted Display Bracket for your CGC slab - case and comic not included.)
from £4.73
Why buy these ones?
* Sympathetic design - the comic's the star.
* No screws, and they can be removed if needed.
* Free UK delivery and subsidised postage overseas, so you don't pay over the odds.
* Good print quality.
* A whole range of colours.
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your CGC comic slabs on a wall to make a display. You get two for each slab - one for the top and one for the bottom.
For details of how to put them up, please read further down.
The shelves include Command Strips and No More Nails removable strips to hang them. To keep things simple I'll do all shelves in one pack the same colour as standard, but if you'd rather have a mixture just add a note to your order. I have clear available here but just to be clear (hah), they're not like glass. More like frosted glass. You can see it in some of the photos.
The shelves are specifically intended for CGC comic book cases. If you want to be able to display comics not in cases, I have a listing in my shop for those. These ones are deeper, and the top and bottom shelves are different because of the added weight and size.
-------
FITTING INSTRUCTIONS
Fit the bottom shelf first - the bigger of the two. Don't touch the back of the shelf, and ensure the wall is clean. If you can see fingerprints, dust or anything on the shelf or wall, clean with alcohol first. Use two Command Strips on the bottom shelf. Remove the first backing strips and place two tabs on the back of the shelf, ensuring they're fully attached vertically (top to bottom, not side to side) to the flat surface and don't overhang. The removal tab should be facing upwards so that it'll be hidden behind the slab once installed. Before removing the second backing paper from each, press down onto a flat surface for 5-10 seconds to ensure its really stuck. Remove the second backing strip from each tab and press firmly onto your smooth, painted wall for 10 seconds, pressing with both hands on the back surface of the shelf only. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Place a CGC slab on the bottom shelf and then repeat the process with a small shelf inverted at the top, ensuring the front hook is just in front of the top of the case. Use a No More Nails (yellow) strip on the top. This one won't be taking any weight, but stops your slab from falling forward.
Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall.
-------
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
* Sympathetic design - the comic's the star.
* No screws, and they can be removed if needed.
* Free UK delivery and subsidised postage overseas, so you don't pay over the odds.
* Good print quality.
* A whole range of colours.
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your CGC comic slabs on a wall to make a display. You get two for each slab - one for the top and one for the bottom.
For details of how to put them up, please read further down.
The shelves include Command Strips and No More Nails removable strips to hang them. To keep things simple I'll do all shelves in one pack the same colour as standard, but if you'd rather have a mixture just add a note to your order. I have clear available here but just to be clear (hah), they're not like glass. More like frosted glass. You can see it in some of the photos.
The shelves are specifically intended for CGC comic book cases. If you want to be able to display comics not in cases, I have a listing in my shop for those. These ones are deeper, and the top and bottom shelves are different because of the added weight and size.
-------
FITTING INSTRUCTIONS
Fit the bottom shelf first - the bigger of the two. Don't touch the back of the shelf, and ensure the wall is clean. If you can see fingerprints, dust or anything on the shelf or wall, clean with alcohol first. Use two Command Strips on the bottom shelf. Remove the first backing strips and place two tabs on the back of the shelf, ensuring they're fully attached vertically (top to bottom, not side to side) to the flat surface and don't overhang. The removal tab should be facing upwards so that it'll be hidden behind the slab once installed. Before removing the second backing paper from each, press down onto a flat surface for 5-10 seconds to ensure its really stuck. Remove the second backing strip from each tab and press firmly onto your smooth, painted wall for 10 seconds, pressing with both hands on the back surface of the shelf only. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Place a CGC slab on the bottom shelf and then repeat the process with a small shelf inverted at the top, ensuring the front hook is just in front of the top of the case. Use a No More Nails (yellow) strip on the top. This one won't be taking any weight, but stops your slab from falling forward.
Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall.
-------
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
How many CGC to display?:
Primary color:
Quantity:
Why buy these ones?
* Sympathetic design - the comic's the star.
* No screws, and they can be removed if needed.
* Free UK delivery and subsidised postage overseas, so you don't pay over the odds.
* Good print quality.
* A whole range of colours.
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your CGC comic slabs on a wall to make a display. You get two for each slab - one for the top and one for the bottom.
For details of how to put them up, please read further down.
The shelves include Command Strips and No More Nails removable strips to hang them. To keep things simple I'll do all shelves in one pack the same colour as standard, but if you'd rather have a mixture just add a note to your order. I have clear available here but just to be clear (hah), they're not like glass. More like frosted glass. You can see it in some of the photos.
The shelves are specifically intended for CGC comic book cases. If you want to be able to display comics not in cases, I have a listing in my shop for those. These ones are deeper, and the top and bottom shelves are different because of the added weight and size.
-------
FITTING INSTRUCTIONS
Fit the bottom shelf first - the bigger of the two. Don't touch the back of the shelf, and ensure the wall is clean. If you can see fingerprints, dust or anything on the shelf or wall, clean with alcohol first. Use two Command Strips on the bottom shelf. Remove the first backing strips and place two tabs on the back of the shelf, ensuring they're fully attached vertically (top to bottom, not side to side) to the flat surface and don't overhang. The removal tab should be facing upwards so that it'll be hidden behind the slab once installed. Before removing the second backing paper from each, press down onto a flat surface for 5-10 seconds to ensure its really stuck. Remove the second backing strip from each tab and press firmly onto your smooth, painted wall for 10 seconds, pressing with both hands on the back surface of the shelf only. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Place a CGC slab on the bottom shelf and then repeat the process with a small shelf inverted at the top, ensuring the front hook is just in front of the top of the case. Use a No More Nails (yellow) strip on the top. This one won't be taking any weight, but stops your slab from falling forward.
Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall.
-------
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
* Sympathetic design - the comic's the star.
* No screws, and they can be removed if needed.
* Free UK delivery and subsidised postage overseas, so you don't pay over the odds.
* Good print quality.
* A whole range of colours.
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your CGC comic slabs on a wall to make a display. You get two for each slab - one for the top and one for the bottom.
For details of how to put them up, please read further down.
The shelves include Command Strips and No More Nails removable strips to hang them. To keep things simple I'll do all shelves in one pack the same colour as standard, but if you'd rather have a mixture just add a note to your order. I have clear available here but just to be clear (hah), they're not like glass. More like frosted glass. You can see it in some of the photos.
The shelves are specifically intended for CGC comic book cases. If you want to be able to display comics not in cases, I have a listing in my shop for those. These ones are deeper, and the top and bottom shelves are different because of the added weight and size.
-------
FITTING INSTRUCTIONS
Fit the bottom shelf first - the bigger of the two. Don't touch the back of the shelf, and ensure the wall is clean. If you can see fingerprints, dust or anything on the shelf or wall, clean with alcohol first. Use two Command Strips on the bottom shelf. Remove the first backing strips and place two tabs on the back of the shelf, ensuring they're fully attached vertically (top to bottom, not side to side) to the flat surface and don't overhang. The removal tab should be facing upwards so that it'll be hidden behind the slab once installed. Before removing the second backing paper from each, press down onto a flat surface for 5-10 seconds to ensure its really stuck. Remove the second backing strip from each tab and press firmly onto your smooth, painted wall for 10 seconds, pressing with both hands on the back surface of the shelf only. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Place a CGC slab on the bottom shelf and then repeat the process with a small shelf inverted at the top, ensuring the front hook is just in front of the top of the case. Use a No More Nails (yellow) strip on the top. This one won't be taking any weight, but stops your slab from falling forward.
Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall.
-------
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
Why buy these ones?
* Sympathetic design - the comic's the star.
* No screws, and they can be removed if needed.
* Free UK delivery and subsidised postage overseas, so you don't pay over the odds.
* Good print quality.
* A whole range of colours.
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your CGC comic slabs on a wall to make a display. You get two for each slab - one for the top and one for the bottom.
For details of how to put them up, please read further down.
The shelves include Command Strips and No More Nails removable strips to hang them. To keep things simple I'll do all shelves in one pack the same colour as standard, but if you'd rather have a mixture just add a note to your order. I have clear available here but just to be clear (hah), they're not like glass. More like frosted glass. You can see it in some of the photos.
The shelves are specifically intended for CGC comic book cases. If you want to be able to display comics not in cases, I have a listing in my shop for those. These ones are deeper, and the top and bottom shelves are different because of the added weight and size.
-------
FITTING INSTRUCTIONS
Fit the bottom shelf first - the bigger of the two. Don't touch the back of the shelf, and ensure the wall is clean. If you can see fingerprints, dust or anything on the shelf or wall, clean with alcohol first. Use two Command Strips on the bottom shelf. Remove the first backing strips and place two tabs on the back of the shelf, ensuring they're fully attached vertically (top to bottom, not side to side) to the flat surface and don't overhang. The removal tab should be facing upwards so that it'll be hidden behind the slab once installed. Before removing the second backing paper from each, press down onto a flat surface for 5-10 seconds to ensure its really stuck. Remove the second backing strip from each tab and press firmly onto your smooth, painted wall for 10 seconds, pressing with both hands on the back surface of the shelf only. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Place a CGC slab on the bottom shelf and then repeat the process with a small shelf inverted at the top, ensuring the front hook is just in front of the top of the case. Use a No More Nails (yellow) strip on the top. This one won't be taking any weight, but stops your slab from falling forward.
Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall.
-------
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
* Sympathetic design - the comic's the star.
* No screws, and they can be removed if needed.
* Free UK delivery and subsidised postage overseas, so you don't pay over the odds.
* Good print quality.
* A whole range of colours.
(Please read below for more info, including fitting instructions.)
-------
These are 3D printed display shelves, perfect for mounting your CGC comic slabs on a wall to make a display. You get two for each slab - one for the top and one for the bottom.
For details of how to put them up, please read further down.
The shelves include Command Strips and No More Nails removable strips to hang them. To keep things simple I'll do all shelves in one pack the same colour as standard, but if you'd rather have a mixture just add a note to your order. I have clear available here but just to be clear (hah), they're not like glass. More like frosted glass. You can see it in some of the photos.
The shelves are specifically intended for CGC comic book cases. If you want to be able to display comics not in cases, I have a listing in my shop for those. These ones are deeper, and the top and bottom shelves are different because of the added weight and size.
-------
FITTING INSTRUCTIONS
Fit the bottom shelf first - the bigger of the two. Don't touch the back of the shelf, and ensure the wall is clean. If you can see fingerprints, dust or anything on the shelf or wall, clean with alcohol first. Use two Command Strips on the bottom shelf. Remove the first backing strips and place two tabs on the back of the shelf, ensuring they're fully attached vertically (top to bottom, not side to side) to the flat surface and don't overhang. The removal tab should be facing upwards so that it'll be hidden behind the slab once installed. Before removing the second backing paper from each, press down onto a flat surface for 5-10 seconds to ensure its really stuck. Remove the second backing strip from each tab and press firmly onto your smooth, painted wall for 10 seconds, pressing with both hands on the back surface of the shelf only. Leave it a couple of hours before putting anything on it and check that it is stuck firmly and flat, and hasn't come away at the edges or corners. Place a CGC slab on the bottom shelf and then repeat the process with a small shelf inverted at the top, ensuring the front hook is just in front of the top of the case. Use a No More Nails (yellow) strip on the top. This one won't be taking any weight, but stops your slab from falling forward.
Please note: I'm including the removable strips free of charge, but I can't take responsibility for how you put them up. I've tested them, and I've had lots of happy customers, but if you don't put them up properly or the surface you're sticking them to isn't appropriate, they will fall down risking damage. They need to be stuck to a well-painted, smooth (non-textured, painted, not wall-papered), clean wall.
-------
Any questions or issues please get in touch. I can do custom orders and I can offer discounts for large batches.
Thanks
Rob
